Advantages And Characteristics Of Railway Crossing Rubber Plate

The railway crossing rubber plate is composed of three parts: the inter-track paving panel, the track side paving panel and the end locking device. There is an 80mm rim groove on the inter-track pavement panel near the rails to avoid the harmful impact of the motor vehicle on the railway line when passing through the railway inter-track pavement panel, and also slow down the damage to the rim groove panel when the train passes, and retain the maximum extent. Layout of existing railway crossings.

P50 rubber sheet refers to the 50kg rail matching rubber crossing board p50, with three specifications of 1.1m, 1.65m and 2.2m in length, which can be selected according to the actual situation of the crossing; the width is 2.5m, each group consists of 4 pieces, and the width of the two middle rails is 750mm, the outer two pieces of the rail are 480mm.

Railway crossing P50 rubber sheet is widely used, not only for railway crossings, such as power plants, station platforms, station aisles, freight yards, vehicle depot maintenance workshops, special lines inside and outside, enterprise, mine-specific railways, highway level crossings useful.

The advantages of railway crossing P50 rubber sheet:
1. Applicable to: railway and highway level crossings, urban light rail ring line level crossings, as well as station platforms, station luggage cart aisles, freight yards, locomotive depots and vehicle depot maintenance workshops inside and outside the special line. Enterprise, mine special railway, highway level crossing.
2. Good shock absorption and noise reduction performance. Due to the elasticity of the rubber, the product greatly weakens the impact force when the vehicle passes, reduces the impact feeling, and has a good shock absorption and noise reduction effect.
3. Beautiful and smooth appearance. Beautiful and neat, smooth and smooth, it is conducive to the beautification of the factory area and the construction of an ecological factory area.
4. High safety factor. Reduce the stalling of motor vehicles and safety accidents at the crossing when the motor vehicle passes through the crossing, which is conducive to improving the safety factor and building a harmonious society
5. The use time period is long. The service life is 15-18 years, and the manufacturer is responsible for free maintenance within 15 years, which can save a lot of maintenance costs and time and energy.

I hope this content is helpful to you. We are a professional rubber fenders manufacturer. If you want to know more professional information, please continue to pay attention to us.